How To Change Rav4 Key Battery 2020

Okay, your trusty 2020 Rav4 key fob is starting to act like it's auditioning for a sloth documentary. Pressing the buttons feels like sending smoke signals – hoping someone, somewhere, eventually gets the message. Let's face it, it's time for a battery swap!

Don't worry, you don't need to call a locksmith and sell a kidney to pay for it. Changing the battery in your Rav4 key fob is easier than making toast. I promise!

Gather Your Supplies (Like a Superhero Assembling Their Gear)

First, you'll need a new battery. The Rav4 key fob usually takes a CR2032 battery. They're pretty common, you can find them at most drugstores, supermarkets, or even online.

Grab a small flathead screwdriver, the kind you might use to tighten the screws on your glasses. If you don't have one, borrow one from a friend. Just promise to return it (eventually!).

Pop That Key Out (Like a Champagne Cork!)

Locate the little button or switch on the side of your key fob. This is the key release. Press it, and the mechanical key will pop out like a surprised groundhog!

Set the key aside in a safe place, like where you keep your spare socks or important receipts. You don't want to lose it in the sofa cushions – trust me, I've been there.

Pry It Open (Gently, Like a Sleepy Kitten)

Now, take a good look at the spot where the key used to be. You'll notice a small slot or opening. This is where your trusty flathead screwdriver comes in.

Insert the tip of the screwdriver into the slot and gently twist. Don't force it! You're not trying to open Fort Knox, just a little plastic case. You might hear a small "click," which is a good sign.

Carefully pry the two halves of the key fob apart. They should separate fairly easily.

Battery Time (Like a Clock About To Strike!)

Inside, you'll see the old battery nestled snugly in its little home. Take note of which side is facing up (+ or -), so you know which way to put the new one in.

Use your fingernail or the tip of your screwdriver to gently pop the old battery out. Be careful not to damage any of the internal components.

New Battery In (The Grand Finale!)

Take your new CR2032 battery and place it into the slot, making sure the correct side is facing up. It should snap into place with a satisfying little "click."

Double-check that the battery is securely in place. You don't want it rattling around like a loose marble.

Snap It Back Together (Like Puzzle Pieces!)

Now, carefully align the two halves of the key fob and press them back together. You should hear another satisfying "click" as they snap into place.

Make sure the case is completely closed, with no gaps or openings. If it's not closing properly, double-check that the battery is seated correctly.

Test It Out (Victory Lap Time!)

Reinsert the mechanical key into the key fob until it clicks into place. Now, test the buttons on your key fob. Lock, unlock, panic – give them all a whirl!

If everything works, congratulations! You've successfully changed the battery in your Rav4 key fob and saved yourself a trip to the dealership (and a hefty bill). If it's not working, double check the battery is correctly installed, and seated.

Now you can strut around with your fully functional key fob, knowing you're a DIY superstar! You conquered that battery like a champion!